Skip to main content

Tunelgroup Cooling Systems

SECTIONAL DOORS

Behind This Door Isn’t Just Cold, It’s Safe

sectional doors

Sectional Doors

Sectional doors combine insulated horizontal panels with a guided lifting mechanism to provide access for warehouses, factories and loading areas. TunelGroup configures the panels, tracks, drive and controls around the opening dimensions and operating conditions.

How do sectional doors work?

Hinged panel sections travel in side tracks. Depending on the selected track arrangement, the door opens beneath the ceiling, rises higher before turning, or lifts vertically above the opening.

This movement keeps the floor approach clear of a swinging door leaf. For a cold-storage boundary, selection must also account for thermal performance, air leakage, sealing and the required operating temperature.

sectional doors 1

Sectional Doors in Cold Storage and Logistics

  • Control heat transfer at the opening

    Insulated panels, inter-panel seals and perimeter gaskets work together when the door is closed. Actual performance depends on the complete door assembly, its dimensions and the quality of installation.

  • Keep the loading route clear

    Vertical movement avoids an outward or inward swing area. The track layout must leave sufficient clearance for vehicles, stored goods, ceiling services and maintenance access.

  • Support controlled traffic

    Motor operation, activation controls and vision windows can be selected around the loading routine. Closing procedures should minimise unnecessary open time without compromising safe passage.

  • Coordinate the loading bay

    Dock levellers, shelters and protective bumpers can be specified alongside the door. Their geometry and controls should be coordinated as part of the loading position.

sectional doors 3

What Are the Main Sectional Door Parts?

The door’s performance depends on how the moving panels, guidance, counterbalance and controls work together.

  • Insulated panels & hingesHorizontal sandwich panels connected by hinges form the moving door leaf.
  • Rollers & guide tracksSide rollers follow the selected vertical and overhead track arrangement.
  • Counterbalance assemblyTorsion springs, shafts, drums and lifting cables are sized to the door weight and operating duty.
  • Seals & fixing hardwarePanel-joint, side, top and bottom seals close the perimeter; brackets and fasteners secure the assembly to the building.
  • Drive, controls & protective devicesManual or motor operation is specified with the required controls, spring and cable failure protection, and closing-edge protection.

Spring and cable assemblies carry stored energy. Adjustment, repair and safety-device checks should be performed by trained door-service personnel.

Sectional Door Features and Construction

  • Insulated sandwich panels

    The current product specification lists 40 mm panels with polyurethane insulation at a density of 48–50 kg/m³. Panel thickness and foam density describe the construction; whole-door thermal performance must be checked separately.

  • Finishes for the environment

    Galvanized steel, RAL colour finishes and AISI 304 stainless steel surface options are listed. The finish and hardware should be selected for the installation’s humidity, cleaning routine and corrosion exposure.

  • Drive and manual operation

    Motorised drive and chain-hoist arrangements can be specified to suit the opening. Confirm the operating duty, power supply, emergency manual operation and access for servicing.

  • Visibility and sealing

    Optional double-wall acrylic windows provide daylight and sightlines. Joint and perimeter seals should be selected as part of the complete moving door assembly.

Sectional Doors: Specification Summary

  • The following references support initial project planning. Final dimensions, hardware and performance values belong in the approved door schedule.

    ITEMPUBLISHED REFERENCE / SELECTION REQUIREMENT
    Panel construction40 mm insulated sandwich panel with polyurethane core
    Foam density48–50 kg/m³, as listed on the current product page
    Surface optionsGalvanized steel, RAL finishes and AISI 304 stainless steel; confirm the selected combination
    Track arrangementsStandard lift, high lift or vertical lift, according to available clearances
    GlazingOptional double-wall acrylic windows; confirm position and configuration
    Drive & controlsSelected for door size, weight, daily cycles, power supply and operating method
    Protective devicesConfirm cable-break and spring-break protection, closing-edge protection and detection devices for the selected operating mode
    Thermal & weather performanceConfirm whole-door thermal transmittance, air permeability, wind resistance and temperature suitability for the exact assembly
    Loading-bay equipmentDock levellers, shelters and bumpers are separately specified items

    The published 40 mm panel reference does not establish a freezer temperature rating or a whole-door U-value. Refrigerated applications require confirmation of the complete assembly, sealing and condensation-control provisions.

Choose the Track Arrangement Around the Building

  • Headroom, ceiling height and obstructions determine how the panels can travel above the opening.

    Under the ceiling

    Higher before the turn

    Straight above the opening

    The door rises through a curved track and continues horizontally into the building. Check both headroom and the required depth behind the opening.The panels rise farther above the lintel before turning onto horizontal tracks. This can help keep the tracks above nearby equipment.The door travels vertically without a horizontal ceiling section. The wall and building height must provide the required space above the opening.

     

What We Need to Specify Your Sectional Door

    • Clear opening width and height
    • Headroom, side room and available building depth
    • Supporting wall and structural fixing details
    • Temperatures and humidity on both sides
    • Daily operating cycles and vehicle clearances
    • Power supply and preferred activation method
    • Required finish, windows and cleaning conditions
    • Dock equipment and the required protection package

    Send your opening dimensions and site conditions. TunelGroup can help define the panel, track, drive and control configuration for your project.

We manufacture industrial cooling systems panels, doors, cooling devices and ice machines under one roof!

TUNELGROUP PRODUCTS

Cold Storage Pioneer in Industrial Design

Manufacturing and Sales of Industrial Cold Storage Wall, Ceiling and Floor Panels

Manufacturing and Sales of Industrial Cold Storage Sliding, Hinged, Monorail and Flip-Flap Doors

Manufacturing and Sales of Split Type Hermetic, Semi-Hermetic and Double Stage Shock Devices for Industrial Cold Storage

Easy Installation Possibility with Modular Type Cold Rooms and Monoblock Cooling Devices

Manufacturing and Sales of Facade and Roof Panels for Exterior and Roof Covering of Industrial Warehouses

Manufacturing and Sales of Sectional, Office-Service and Fast Rolling Doors for Industrial Warehouses

Manufacturing and Sales of Industrial Cold Storage Ceiling Type and Standard Type Cooling Systems

Manufacturing and Sales of Ready-made System Container Cold Storages with Wall, Ceiling, Floor Insulation and Cooling Devices

We manufacture industrial cooling systems panels, doors, cooling devices and ice machines under one roof!

FIELDS OF ACTIVITY

Contracting, Service and Engineering

Tunelgroup Industrial Cooling Systems; Manufactures and Sells Industrial Cooling Systems Panels, Doors and Cooling Devices. With its high engineering principles and perception of quality, it offers its customers efficiency-based, respected and sustainable services. Our company; From planning to design, from the project process to investment, from development to turnkey completion, it offers engineering services and professional solution partnerships in your investments with our own production steel construction systems.

By combining innovation, sustainability, and expertise, Tunel Group delivers cold storage for meat solutions that not only guarantee optimal preservation but also align with modern energy efficiency and sustainability standards.

With a commitment to quality, innovation, and sustainability, Tunel Group ensures that poultry producers and distributors can optimize cold storage for chicken conditions while reducing operational costs, providing reliable and sustainable solutions for the seafood industry.

With a commitment to quality, innovation, and sustainability, Tunel Group optimizes cold storage for fish conditions while reducing operational costs, providing reliable and sustainable solutions for the seafood industry.

By combining innovation, sustainability, and expertise, Tunel Group delivers advanced cold room solutions for fruits that meet the highest industry standards, ensuring your fruits remain fresh and market-ready.

By combining innovation, sustainability, and expertise, Tunel Group ensures your vegetables are stored in optimal cold room for vegetables conditions, extending shelf life and preserving quality.

By combining innovation, sustainability, and expertise, Tunel Group ensures your dairy products are stored in optimal cold storage for dairy conditions, extending shelf life and preserving quality.

With a commitment to quality, innovation, and sustainability, Tunel Group ensures that bakery producers can optimize cold storage for bakery conditions while reducing operational costs.

Our cutting-edge flower cold rooms create the perfect environment for flowers, minimizing wilting, discoloration, and decay while enhancing their natural beauty and longevity.

Our cold room systems are meticulously engineered to address the unique requirements of the pharmaceutical sector, guaranteeing optimal storage conditions throughout the entire product lifecycle.

CONTACT US FOR SECTIONAL DOORS

To get a quote for your projects, Tunelgroup Cooling Systems Ltd. To request information on behalf of Sti services and products, please

“Contact us”

Fill in the form. We will contact you as soon as possible.

Contact Us For Sectional Doors

Have questions or ready to take the next step? Contact us; we are here to help you on your cooling systems journey.

Working Time

Mon-Fri: 09:00 - 18:00
Closed on Weekends

İstanbul Factory

Dudullu Organize Sanayi Bölgesi, Nato Yolu Cd No:39, 34776
Y. Dudullu/Ümraniye/İstanbul

Bursa Factory

Kayapa, Kayapa OSB, 10. Sk. No:6, 16315
Ni̇lüfer/Bursa

Follow Us

Fill Out The Form For Sectional Doors

Whether you are looking for guidance, planning a cold room or simply want more information, we have you covered.

Contact Form

Our Mega Structure Design and Manufacturing Efficiency is at the Top Level with Knowledge, Experience and Effective Engineering

TUNELGROUP COOLING SYSTEMS