

Motorized Sliding Cold Room Doors provide automated access to temperature-controlled rooms while helping limit heat transfer when closed. TunelGroup combines an insulated door leaf with a powered sliding mechanism for facilities handling frequent pallet, trolley and personnel movements.
Each door is specified around the clear opening, room temperature, traffic frequency, wall construction and available space beside the opening.
A motorized sliding cold room door moves horizontally along a rail and parks beside the opening. Its single-leaf, monoblock construction combines a rigid polyurethane core with protective facings and perimeter seals.
The opening direction, door thickness, controls and low-temperature accessories are selected to suit the installation. Sufficient side clearance and headroom are required for the complete door and drive assembly.
A well-specified doorway supports product flow, temperature control and everyday access. The door, its controls and the surrounding layout should be considered together.
A rack-and-pinion drive moves the door leaf along its rail. The drive must be matched to the leaf size, weight and operating duty.
The published range includes remote-control operation and adjustable timing. Confirm the required opening commands and closing sequence for the project.
Photocells support obstruction detection. The complete safeguarding arrangement and its response to obstacles must be assessed for the installation and tested during commissioning.
Confirm the manual-release procedure, power-failure behaviour and internal emergency-opening arrangement with the selected hardware.
EPDM gaskets provide the sealing interface. Heated components are specified where required for frozen storage; inspection access should be retained for seals, guides and the drive.
Published options for Motorized Sliding Cold Room Doors. Final components are confirmed in the project specification.
| Door arrangement | Single-leaf, monoblock sliding door |
|---|---|
| Opening direction | Left or right, to suit the layout |
| Door-leaf thicknesses | 70 / 90 / 120 mm |
| Insulation | Rigid polyurethane (PUR) foam |
| Published foam density | 40-43 kg/m³ |
| Steel facing | 0.5 mm, as listed in the product range |
| Frame options | PVC or anodized aluminium |
| Perimeter seal | EPDM gasket system |
| Powered drive | Rack-and-pinion mechanism |
| Door controls | Remote operation and adjustable timing |
| Heater specification | 220 V / 25 W per metre; heater circuit only |
| Finish | RAL colour options, subject to selection |
Clear opening width and height; room and ambient temperatures; opening direction; side and overhead clearances; wall or panel construction; traffic frequency; motor electrical supply; heater supply where applicable; controls; and the required safety and emergency-release arrangement.
Door-leaf thickness alone does not define the operating temperature or thermal performance of the complete assembly. Confirm the door, frame, seals, heaters and installation details together. Product images illustrate configurations; the supplied arrangement follows the approved project specification.
We manufacture industrial cooling systems panels, doors, cooling devices and ice machines under one roof!
Cold Storage Pioneer in Industrial Design
Manufacturing and Sales of Industrial Cold Storage Wall, Ceiling and Floor Panels
Manufacturing and Sales of Industrial Cold Storage Sliding, Hinged, Monorail and Flip-Flap Doors
Manufacturing and Sales of Split Type Hermetic, Semi-Hermetic and Double Stage Shock Devices for Industrial Cold Storage
Easy Installation Possibility with Modular Type Cold Rooms and Monoblock Cooling Devices
Manufacturing and Sales of Facade and Roof Panels for Exterior and Roof Covering of Industrial Warehouses
Manufacturing and Sales of Sectional, Office-Service and Fast Rolling Doors for Industrial Warehouses
Manufacturing and Sales of Industrial Cold Storage Ceiling Type and Standard Type Cooling Systems
Manufacturing and Sales of Ready-made System Container Cold Storages with Wall, Ceiling, Floor Insulation and Cooling Devices
We manufacture industrial cooling systems panels, doors, cooling devices and ice machines under one roof!
Contracting, Service and Engineering
Tunelgroup Industrial Cooling Systems; Manufactures and Sells Industrial Cooling Systems Panels, Doors and Cooling Devices. With its high engineering principles and perception of quality, it offers its customers efficiency-based, respected and sustainable services. Our company; From planning to design, from the project process to investment, from development to turnkey completion, it offers engineering services and professional solution partnerships in your investments with our own production steel construction systems.
By combining innovation, sustainability, and expertise, Tunel Group delivers cold storage for meat solutions that not only guarantee optimal preservation but also align with modern energy efficiency and sustainability standards.
With a commitment to quality, innovation, and sustainability, Tunel Group ensures that poultry producers and distributors can optimize cold storage for chicken conditions while reducing operational costs, providing reliable and sustainable solutions for the seafood industry.
With a commitment to quality, innovation, and sustainability, Tunel Group optimizes cold storage for fish conditions while reducing operational costs, providing reliable and sustainable solutions for the seafood industry.
By combining innovation, sustainability, and expertise, Tunel Group delivers advanced cold room solutions for fruits that meet the highest industry standards, ensuring your fruits remain fresh and market-ready.
By combining innovation, sustainability, and expertise, Tunel Group ensures your vegetables are stored in optimal cold room for vegetables conditions, extending shelf life and preserving quality.
By combining innovation, sustainability, and expertise, Tunel Group ensures your dairy products are stored in optimal cold storage for dairy conditions, extending shelf life and preserving quality.
With a commitment to quality, innovation, and sustainability, Tunel Group ensures that bakery producers can optimize cold storage for bakery conditions while reducing operational costs.
Our cutting-edge flower cold rooms create the perfect environment for flowers, minimizing wilting, discoloration, and decay while enhancing their natural beauty and longevity.
Our cold room systems are meticulously engineered to address the unique requirements of the pharmaceutical sector, guaranteeing optimal storage conditions throughout the entire product lifecycle.
Have questions or ready to take the next step? Contact us; we are here to help you on your cooling systems journey.
Mon-Fri: 09:00 - 18:00
Closed on Weekends
Dudullu Organize Sanayi Bölgesi, Nato Yolu Cd No:39, 34776
Y. Dudullu/Ümraniye/İstanbul
Kayapa, Kayapa OSB, 10. Sk. No:6, 16315
Ni̇lüfer/Bursa
Whether you are looking for guidance, planning a cold room or simply want more information, we have you covered.
Our Mega Structure Design and Manufacturing Efficiency is at the Top Level with Knowledge, Experience and Effective Engineering