Skip to main content

Tunelgroup Cooling Systems

ROLL-UP DOORS

Behind This Door Isn’t Just Cold, It’s Safe

Roll-Up Doors

Roll-up doors provide fast access between production, storage and loading areas. TunelGroup offers folding, rolling, zipper-guided, modular and insulated models, allowing the door to be matched to traffic frequency, exposure and temperature requirements.

Choose the door around the opening.

A busy interior passage, an exposed exterior entrance and a freezer doorway place different demands on the curtain, frame and controls. Start with the operating conditions, then select the model and options.

For temperature-controlled access, the FREEZER ROLL model provides an insulated curtain. Thermal suitability for other models should be confirmed for the specific installation.

Roll-Up Doors 1

Fold-Up PVC Doors for Exposed Openings

The FLEX model is designed for busy openings where a reinforced folding curtain is required. Its galvanized steel construction and horizontal reinforcement make it a practical option for exterior access, subject to the opening size and wind conditions.

  • Reinforcement matched to the opening

    Curtain reinforcement is selected according to door dimensions. The published construction includes 2 mm galvanized steel uprights, with an optional painted finish.

  • Visibility and activation options

    Transparent PVC windows improve sightlines across the opening. A vehicle loop detector or remote control can be specified to suit the traffic route.

  • A clear specification for outdoor use

    Confirm the required wind resistance, mounting structure and available headroom before selection. The published operating speed is 0.7 m/s with the EP-500 control unit.

Roll-Up PVC Doors for Frequent Indoor Traffic

The ROLL model provides rapid access between working areas. The flexible PVC curtain rolls above the opening, helping keep production and warehouse routes clear during frequent daily movements.

  • Configured around the traffic flow

    Published operating speeds range from 0.7 to 1.5 m/s. The selected drive, controls and opening size determine the final operating configuration.

  • Flexible curtain options

    Transparent PVC vision areas can be arranged to improve visibility. Steel bars or a bead system may be used for curtain reinforcement, while curtain colour and printing can be specified.

  • Practical separation within a facility

    Suitable applications include warehouse passages, production areas, food processing facilities and distribution centres. For refrigerated areas, confirm the thermal duty of the selected door assembly.

Zipper-Guided PVC Doors with a Soft Bottom Edge

ZIPPER ROLL uses guided flexible curtain edges and a soft bottom edge for busy industrial passages. The curtain guidance is designed to allow re-insertion after certain curtain dislodgements, helping limit interruption to everyday operations.

  • Flexible curtain guidance

    The zipper arrangement guides the curtain along both sides of the opening. Indoor or outdoor suitability must be matched to the door size and specified wind resistance.

  • A defined recovery function

    The re-insertion feature concerns a displaced curtain. Damage to the frame, drive, sensors or curtain still requires inspection and, where necessary, repair.

  • Controls matched to people and vehicles

    The published operating speed is 0.7 m/s with the EP-500 control unit. Activation zones and protective devices should be specified for the actual traffic pattern; a soft bottom edge alone is not a complete safety system.

Modular PVC Doors for Busy Interior Openings

MOD ROLL combines a flexible PVC curtain with modular aluminium profiles. It is intended for frequent indoor use and locations with limited wind exposure, with a construction that supports replacement of individual damaged sections.

  • Modular construction

    Aluminium profiles connect the curtain sections. This arrangement allows the affected section to be assessed and replaced without automatically replacing the complete curtain.

  • Visibility and bottom sealing

    Transparent vision sections can be incorporated into the curtain. The aluminium bottom rail carries a bottom seal to help close the gap at the floor.

  • Operating and protection options

    The published speed range is 0.7–1.5 m/s. An optical bottom safety system can be connected; confirm the complete protection package, control logic and maintenance access in the project specification.

Roll-Up Doors 8

Insulated Roll-Up Doors for Cold Storage

FREEZER ROLL is the insulated model for refrigerated and freezer access. The published operating range is −25°C to +40°C, with single- or double-mechanism configurations available according to the application.

  • Insulation and rapid access

    The insulated curtain is designed for temperature-controlled passages. Shorter opening periods can help reduce air exchange, while the final thermal performance depends on the complete door assembly and operating conditions.

  • Temperature and moisture considered together

    Selection should account for both sides of the opening: room temperature, warm-side humidity, traffic frequency and condensation or frost risk. Any heating or moisture-control provisions must be confirmed for the installation.

  • The complete opening matters

    The published speed is 0.7 m/s with the EP-500 control unit. Confirm whether the selected assembly will be the primary thermal closure or work alongside an insulated cold-room door.

Roll-Up Doors: Model Comparison

Use the table to shortlist a model before confirming the complete door schedule.

MODELCONSTRUCTION & TYPICAL DUTYPUBLISHED SPEEDTEMPERATURE REFERENCE
FLEXReinforced folding PVC curtain; exterior access0.7 m/s*Confirm for the application
ROLLRolling PVC curtain; frequent interior traffic0.7–1.5 m/sConfirm for the application
ZIPPER ROLLZipper-guided curtain and soft bottom edge0.7 m/s*Confirm for the application
MOD ROLLModular curtain with aluminium profiles; interior access0.7–1.5 m/sConfirm for the application
FREEZER ROLLInsulated curtain; refrigerated and freezer access0.7 m/s*−25°C to +40°C

Published with the EP-500 control unit. These figures are product-page references. Final speed, door size, wind resistance, temperature suitability and equipment scope must be confirmed in the project quotation and approved technical schedule.

Specify the Complete Door Opening

Opening & mounting

Provide clear width and height, available headroom, side clearances, wall construction and the position of nearby equipment.

Traffic & activation

Identify pedestrians, forklifts, load dimensions, approach direction and daily cycles. Select activation zones and controls around the actual route.

Temperature & exposure

State temperatures and humidity on both sides, indoor or outdoor use, wind exposure and cleaning conditions. Assess condensation at refrigerated openings.

Protection & maintenance

Confirm protective devices, emergency operation, electrical supply, service access and the inspection programme for the selected installation.

Planning a new opening or replacing an existing door?
Share the dimensions and operating conditions with TunelGroup to define the appropriate model, curtain and control package.

We manufacture industrial cooling systems panels, doors, cooling devices and ice machines under one roof!

TUNELGROUP PRODUCTS

Cold Storage Pioneer in Industrial Design

Manufacturing and Sales of Industrial Cold Storage Wall, Ceiling and Floor Panels

Manufacturing and Sales of Industrial Cold Storage Sliding, Hinged, Monorail and Flip-Flap Doors

Manufacturing and Sales of Split Type Hermetic, Semi-Hermetic and Double Stage Shock Devices for Industrial Cold Storage

Easy Installation Possibility with Modular Type Cold Rooms and Monoblock Cooling Devices

Manufacturing and Sales of Facade and Roof Panels for Exterior and Roof Covering of Industrial Warehouses

Manufacturing and Sales of Sectional, Office-Service and Fast Rolling Doors for Industrial Warehouses

Manufacturing and Sales of Industrial Cold Storage Ceiling Type and Standard Type Cooling Systems

Manufacturing and Sales of Ready-made System Container Cold Storages with Wall, Ceiling, Floor Insulation and Cooling Devices

We manufacture industrial cooling systems panels, doors, cooling devices and ice machines under one roof!

FIELDS OF ACTIVITY

Contracting, Service and Engineering

Tunelgroup Industrial Cooling Systems; Manufactures and Sells Industrial Cooling Systems Panels, Doors and Cooling Devices. With its high engineering principles and perception of quality, it offers its customers efficiency-based, respected and sustainable services. Our company; From planning to design, from the project process to investment, from development to turnkey completion, it offers engineering services and professional solution partnerships in your investments with our own production steel construction systems.

By combining innovation, sustainability, and expertise, Tunel Group delivers cold storage for meat solutions that not only guarantee optimal preservation but also align with modern energy efficiency and sustainability standards.

With a commitment to quality, innovation, and sustainability, Tunel Group ensures that poultry producers and distributors can optimize cold storage for chicken conditions while reducing operational costs, providing reliable and sustainable solutions for the seafood industry.

With a commitment to quality, innovation, and sustainability, Tunel Group optimizes cold storage for fish conditions while reducing operational costs, providing reliable and sustainable solutions for the seafood industry.

By combining innovation, sustainability, and expertise, Tunel Group delivers advanced cold room solutions for fruits that meet the highest industry standards, ensuring your fruits remain fresh and market-ready.

By combining innovation, sustainability, and expertise, Tunel Group ensures your vegetables are stored in optimal cold room for vegetables conditions, extending shelf life and preserving quality.

By combining innovation, sustainability, and expertise, Tunel Group ensures your dairy products are stored in optimal cold storage for dairy conditions, extending shelf life and preserving quality.

With a commitment to quality, innovation, and sustainability, Tunel Group ensures that bakery producers can optimize cold storage for bakery conditions while reducing operational costs.

Our cutting-edge flower cold rooms create the perfect environment for flowers, minimizing wilting, discoloration, and decay while enhancing their natural beauty and longevity.

Our cold room systems are meticulously engineered to address the unique requirements of the pharmaceutical sector, guaranteeing optimal storage conditions throughout the entire product lifecycle.

CONTACT US FOR ROLL-UP DOORS

To get a quote for your projects, Tunelgroup Cooling Systems Ltd. To request information on behalf of Sti services and products, please

“Contact us”

Fill in the form. We will contact you as soon as possible.

Contact Us For Roll-Up Doors

Have questions or ready to take the next step? Contact us; we are here to help you on your cooling systems journey.

Working Time

Mon-Fri: 09:00 - 18:00
Closed on Weekends

İstanbul Factory

Dudullu Organize Sanayi Bölgesi, Nato Yolu Cd No:39, 34776
Y. Dudullu/Ümraniye/İstanbul

Bursa Factory

Kayapa, Kayapa OSB, 10. Sk. No:6, 16315
Ni̇lüfer/Bursa

Follow Us

Fill Out The Form For Roll-Up Doors

Whether you are looking for guidance, planning a cold room or simply want more information, we have you covered.

Contact Form

Our Mega Structure Design and Manufacturing Efficiency is at the Top Level with Knowledge, Experience and Effective Engineering

TUNELGROUP COOLING SYSTEMS